VIEWPixx /3D

• Display resolution: 1920(H) x 1080(V) pixels
• 10 bits of resolution on each of the RGB channels
• 24-inch display size (diagonal)
• Contrast ratio: typical 1000:1
• Viewing angle: 170° (Horizontal), 160° (Vertical)
• Pixel pitch: 0.277(H) x 0.277(V) mm
• Pixel arrangement: RGB (Red dot, Green dot, Blue dot) vertical strip
• Polarizer surface: Antiglare
• 100 Hz to 120 Hz refresh rate with zero latency stimulus presentation
• 60 Hz to 100 Hz refresh rate with internal frame buffering
• Pixel response time:
  • 1 ms typical in scanning backlight mode (B-to-W)
  • 2 ms typical in normal backlight mode (G-to-G)
• Luminance:
  • 100 cd/m2 in scanning backlight mode
  • 250 cd/m2 in standard backlight mode
• Uniformity: 95% over 95% of display area

• Scanning LED backlight
• Direct RGB LED array
• Wide gamut LED
• Factory white point D65

• Video input: 1920 x 1080 pixels, 60 to 120 Hz, 24 bits
  (Dual-link DVI)
• Deterministic timing between reception of video signal
  and update of display pixels
• Completely bypass all image processing “enhancements”
  prevalent in standard consumer LCD panels
• Multiple displays can be synchronized, showing copies
  or subsets of original video

• Number of digital inputs: 24 on DB-25 connector
• Input termination: > 20 kΩ pullup to 3.3 V
• Input tolerance: 5 V

• Number of digital outputs: 24 on DB-25 connector
• Output drive stage: 5 V through 25 kΩ series resistor
• Maximum output current:
  • Source: 15 mA
  • Sink: 12 mA

• Number of channels: 16 (or 8 differential), on DB-25
  connector
• Converter resolution: 16 bits
• Maximum sampling rate: 200 kSPS per channel
• Frequency programming modes:
  • Samples per second or per video frame
  • Nanoseconds per sample
• Simultaneous sampling across all channels
• Input range: ±10 V
• Input impedance: 1.6*10⁸ Ω // 3 pF
• Absolute maximum input tolerance ±12 V

• Number of channels: 4 on DB-25 connector
• Converter resolution: 16 bits
• Maximum sampling rate: 1 MSPS per channel
• Frequency programming modes:
  • Samples per second or per video frame
  • Nanoseconds per sample
• Simultaneous output updates
• Output range: ±10 V
• Drive capability: ±25 mA, 250 mW per channel

• Audio line in, microphone in, speaker out, on 3.5 mm jacks
• Stereo microphone input amplifier resistance: 20 kΩ
• Microphone sampling rate: 96 kHz
• Programmable microphone bias voltage range: 2.0 V to 3.1 V
• Stereo DAC sampling rate 96 kHz

• Mounting standards: VESA MIS-D/E, MIS-F
• Hole pattern: 100 x 100 mm & 75 x 75 mm

• Power consumption: 180 W
• Input voltage: 48 VDC – 3.75 A
• International AC adaptor input: 90 VAC – 264 VAC (47 Hz – 63 Hz)

Software support includes a low-level ANSI C API, MATLAB/Octave and Python libraries for use under Microsoft Windows, Ubuntu Linux, and macOS